Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Portland?
Fireplace services in Portland typically run $150 to $275 for a standard chimney sweep and inspection, $225 to $450 for dryer vent cleaning, and $350 to $1,200 for common repairs. Bigger structural work, like relining a flue or restoring damaged tiles, commonly lands between $1,800 and $6,500 depending on the liner type and how much of the flue is affected. Everything we quote is set by a free written estimate, so you know the price before any work starts.
A fireplace is a simple thing to enjoy and an easy thing to neglect. The creosote that builds up inside the flue, the lint that collects in a dryer vent, the cracked tile you can’t see from the living room – all of it sits quietly until it doesn’t. We handle the whole system here: sweeping, dryer vent cleaning, and structural chimney repair under one company, so a sweep that turns up a problem doesn’t send you hunting for a second contractor. Our technicians have up to 9 years of experience, and we use the same professional-grade materials chimney engineers specify, from DuraFlex and HeatShield to Gelco, Olympia Chimney, Famco, and Copperfield. Not big-box hardware-store substitutes.
If you’d like a number for your own chimney, call (866) 413-9023. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
Here’s what the main services look like in the Portland market this year. These are typical ranges for residential homes; your written estimate sets the final price once we’ve seen the flue, the firebox, and the vent run.
| Service | Typical Price Range | What’s Usually Included |
|---|---|---|
| Chimney sweep (standard) | $150 – $275 | Full flue brush, firebox clean, creosote removal, basic visual check |
| Sweep + camera inspection | $225 – $400 | Sweep plus video scan of the flue to spot cracks, gaps, and buildup |
| Dryer vent cleaning | $225 – $450 | Full vent run cleared, lint removed, airflow checked, exterior termination cleared |
| Chimney cap and crown repair | $350 – $750 | Cap replacement or crown sealing to keep water and animals out |
| Masonry and firebox repair | $500 – $2,200 | Repointing, tuckpointing, firebox brick and mortar restoration |
| HeatShield flue resurfacing | $1,200 – $3,200 | Restores deteriorating flue tiles without a full rebuild |
| DuraFlex stainless liner installation | $2,200 – $6,500 | New liner sized to the flue, insulated where needed, sealed at top and bottom |
What pushes a job toward the top of a range and what keeps it near the bottom usually comes down to access and condition. A straight, easily reached flue with light soot sweeps quickly. A flue with heavy glazed creosote, a tight roof pitch, or a chase that runs through an interior wall takes longer and more care. A dryer vent that snakes through a finished basement or exits through the roof costs more to clean than one that runs short and straight to an exterior wall. Repairs scale with how much masonry is involved and whether the liner needs replacing or can be resurfaced. During a sweep, we come prepared to fix what we find, not just report it, so you’re not paying twice for two visits.
What Affects Fireplace Services Pricing in Portland
Portland homes vary more than you’d guess from the street, and the fireplace system inside them varies just as much. These are the factors that move the number most.
- Type of fireplace. A traditional masonry fireplace with a full brick flue costs more to sweep and repair than a factory-built unit with a metal chimney. The masonry takes more time to clean, and any repair means working with brick and mortar rather than swapping a component.
- Creosote level. Light, flaky creosote brushes out in one pass. Glazed, tar-like creosote that’s built up over several seasons sticks to the flue walls and takes more passes with the right tools to clear safely. That extra labor shows up in the price.
- Flue condition and liner needs. If the inspection shows cracked or spalling flue tiles, you’re looking at either HeatShield resurfacing or a full DuraFlex liner. It’s the difference between a repair in the low thousands and a full reline, and the inspection is what tells us which one your chimney actually needs.
- Roofline and access. Many Portland homes sit under mature firs and have steeper or more complex roofs. A chimney that’s easy to reach from a ladder costs less to service than one that needs extra setup. Access affects most of the trades, and chimney work is no exception.
- Dryer vent length and routing. A short vent that exits through the wall is straightforward. A long run, elbows, or a roof termination takes more time and equipment. Lint and creosote are both fire fuels, and the vent run’s layout is a big part of what cleaning it involves.
- Moisture and weather exposure. Portland’s wet winters work on masonry. Water gets into cracks, freezes, and widens them. A crown that’s been letting water in for a few seasons can turn a small repair into a larger one, which is why we look at the crown and cap alongside the flue.
How to Save on Fireplace Services
The cheapest fireplace service is the one that catches a problem while it’s still small. A few habits keep costs down over the life of the system.
- Book a sweep before the heating season, not after. Scheduling early means a smaller problem gets found and fixed before it grows. A $150 sweep that catches a cracked tile is far cheaper than the reline that follows a season of burning through a damaged flue.
- Don’t skip the dryer vent. Dryer vent cleaning sounds like a separate chore, but a clogged vent is a fire hazard that builds quietly. Keeping that vent clear is one of the least expensive services on this list and one of the most worthwhile.
- Fix the crown and cap early. Small masonry repairs cost a fraction of larger ones. If water is getting in, sealing it now beats rebuilding later.
- Ask for a camera inspection when something looks off. You can’t see inside a flue from the living room. A video scan is a modest add-on that tells you exactly what you’re dealing with, so you’re not guessing or paying for work you don’t need.
- Get it all in one visit where it makes sense. Because we handle sweeping, dryer vent cleaning, and repair under one company, you’re not paying separate contractors to come out for related work. A sweep, a vent cleaning, and a small repair can often be handled together.
Our estimates are free. Call (866) 413-9023 and we’ll talk through what your chimney and vent need, with a written price before anything starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Portland?
A standard chimney sweep in Portland typically costs $150 to $275, with a camera inspection added bringing it to roughly $225 to $400. The final price depends on creosote level, fireplace type, and access to the flue. Call (866) 413-9023 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney flue?
Repair is usually the cheaper option when the damage is limited to the flue tiles, and HeatShield resurfacing generally runs $1,200 to $3,200 versus $2,200 to $6,500 for a full DuraFlex reline. The inspection is what tells you which one your chimney needs. Call (866) 413-9023 to book an inspection and get a written estimate for both paths.
How much does dryer vent cleaning cost in Portland?
Dryer vent cleaning in Portland typically runs $225 to $450, depending on vent length, routing, and how much lint has built up. A long run or a roof termination sits at the higher end. Call (866) 413-9023 for a free estimate on your vent run.
Can you come today?
Same-day service is often possible, and our technicians have up to 9 years of experience handling both sweeping and repair. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 413-9023 and we’ll find the soonest opening for your fireplace or vent.
Do you charge extra for after-hours or same-day work?
No. The price is set per job by the written estimate, not by when you call. Same-day work isn’t priced higher, and our free estimate keeps the number predictable. Call (866) 413-9023 to get started – a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Related Services in Portland
Fireplace costs sit inside a broader set of chimney and venting work. If you’re planning ahead, these pages cover the pieces that come up most: Belmont Chimney Cleaning for the full picture of how a sweep, a vent cleaning, and a repair fit together, and Portland for the services and neighborhoods we cover. Chimney sweeping, dryer vent cleaning, and chimney repair each have their own cost drivers, and a single estimate can cover all three when the work overlaps.
Get a Free Fireplace Services Estimate
If your fireplace hasn’t been looked at in a while, or the dryer is taking two cycles to do what one once did, it’s worth a look. We come prepared to fix what we find, not just report it, and we use the same professional-grade materials chimney engineers specify, so the work holds up. Call (866) 413-9023 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Pricing reflects the Portland market as of 2026. Belmont Chimney Cleaning offers free estimates – call (866) 413-9023.
Written by the team at Belmont Chimney Cleaning.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Mark Padgett"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Todd Anderson"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."
- Sarah Delaney