Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Beaverton, OR
Chimney repair in Beaverton usually comes down to water and time. The city’s housing stock leans heavily on ranch and split-level homes built between the 1950s and 1990s, many still carrying their original clay-tile flues and early prefab fireboxes. Add the mild, damp Willamette Valley winters and you get masonry that soaks up rain for months and creosote that stays soft and acidic instead of drying hard. We handle the repair side of that equation, plus the sweep and vent work that keeps it from coming back. Call (866) 413-9023 for a free estimate.
Why Beaverton Homes Are Different
Beaverton sits in the Willamette Valley, not the Cascades foothills and not eastern Oregon. That single fact reshapes the work. There’s no deep-freeze cycle here to crack a crown in one hard night, but there is month after month of rain and high humidity that soaks brick and mortar, feeds moss on shaded chimney exteriors, and leaves white efflorescence blooming across the masonry. Creosote behaves differently too: because our winters are mild enough that fireplaces get used intermittently rather than constantly, the smoke tends to burn damp and slow, laying down glazed acidic deposits that cling tighter than the dry fluffy soot you’d see in a colder, wood-stove-heavy market.
Then there’s the housing. Beaverton’s core neighborhoods are full of 1960s through 1980s suburban ranches and split-levels, many in the 97006 and 97007 ZIP codes, where the original clay-tile liner is now four decades old and has likely never had a real camera inspection. Newer infill and townhomes, particularly in 97003, often have no chimney at all, which makes the older homes the ones that need attention most. A technician working these ranch neighborhoods learns to expect a chimney that looks fine in August to weep rust-colored stains down the firebox and darken its brick by the first November rains, because the low, humid burn cycle here never fully dries the flue between fires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Beaverton Services
Two services account for most of the calls we get from Beaverton homeowners: a proper sweep and a dryer vent cleaning. Both are about moving fire fuel out of the house before it becomes a problem.
Chimney Sweep in Beaverton
A Beaverton sweep is rarely just a brush down the flue. Given how many local chimneys are 40-plus years old, the visit starts with a camera inspection of the liner so we can see the condition of the clay tiles and any gaps before we sweep. Then we remove the soot and the damp, glazed creosote this climate produces, check the firebox, damper, cap, and crown, and leave you a photo report of what we found. If you want the full picture of what a visit covers, see chimney sweep for Beaverton.
Dryer Vent Cleaning in Beaverton
Lint buildup in a dryer vent is one of the leading causes of home dryer fires, and it’s the hazard most chimney-only companies skip. In Beaverton’s older ranch homes, dryer vents often run long distances through crawlspaces or up exterior walls, giving lint plenty of places to collect. We clear the full run, check the exterior termination for a stuck or missing damper, and confirm airflow is restored. Details on scheduling and what the visit includes are on our dryer vent cleaning page.
Chimney Repair in Beaverton
Beaverton’s 1960s to 1980s ranch and split-level homes were built with clay-tile liners and early prefab fireboxes that are now well past their expected service life, and the damp Willamette Valley climate has been quietly working on that masonry the whole time. The result is a steady stream of water damage, cracked crowns, rusted prefab chimneys, and flues that need relining rather than another sweep. Our Chimney Repair work starts with camera evidence, and we come prepared to fix what we find rather than just report it.
Chimney Cap Installation
Signs you need it
An open flue with no cap is letting rain straight down the liner and giving birds and squirrels a way in.
What it costs in Beaverton
A typical cap installation in Beaverton runs $150 to $450 depending on the flue size and whether a custom fit is needed.
How we do it
We measure the flue opening, fit a stainless cap with the correct mesh and clearance, and fasten it to the crown so it sheds water away from the masonry.
Chimney Cap Replacement
Signs you need it
A rusted, dented, or loose cap that rattles in the wind or no longer keeps water out is due for replacement.
What it costs in Beaverton
Replacing an existing cap in Beaverton usually falls between $150 and $400, and the written estimate sets the final price.
How we do it
We remove the failed cap, inspect the crown and flue top while it’s exposed, then fit and secure a new stainless cap sized to the flue.
Chimney Crown Repair
Signs you need it
Hairline cracks across the concrete crown, or water staining on the chimney’s interior walls, point to a crown that’s no longer shedding rain.
What it costs in Beaverton
Crown repair in Beaverton typically lands between $300 and $900 depending on how much of the crown needs rebuilding.
How we do it
We clear the failed concrete, rebuild the slope so water runs off, and seal the perimeter where the crown meets the flue.
What Chimney Repair Costs in Beaverton
These are typical ranges for common repair jobs we see in Beaverton homes. Every job is priced per job by a free written estimate, and nothing is recommended without camera evidence you can see for yourself.
| Item | Typical range in Beaverton |
|---|---|
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $150 – $400 |
| Chimney crown repair | $300 – $900 |
| Chimney flashing repair | $250 – $750 |
| Chimney liner installation | $1,800 – $4,500 |
Does a Beaverton chimney need a repair or just a sweep?
Beaverton chimneys built in the 1960s to 1980s usually need both: a sweep removes the creosote, while a camera inspection reveals whether the clay liner has cracked. If the liner is sound, a sweep may be all you need. Call (866) 413-9023 for an exact quote.
Can chimney repair wait until spring in Beaverton?
Some repairs can safely wait; a small cap issue or a hairline crown crack may hold until drier weather. Liner cracks, flashing leaks, and rusted prefab chimneys should not wait, since the winter rain will make them worse. Call (866) 413-9023 for a free estimate.
Brands We Service in Beaverton
Our repair and relining work uses professional-trade materials from the brands chimney professionals specify: DuraFlex for flexible stainless liners, HeatShield for resurfacing deteriorating clay flue tiles without a full rebuild, and Olympia Chimney for venting components. Turnaround depends on material availability, which we confirm before we book. You can read more on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Beaverton, OR
Below are typical ranges for the work we do most often in Beaverton. These are estimates only, and the free written estimate sets the final price after we’ve seen the chimney.
| Service | Typical range in Beaverton |
|---|---|
| Chimney sweep and inspection | $180 – $340 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $150 – $400 |
| Chimney crown repair | $300 – $900 |
| Chimney flashing repair | $250 – $750 |
| Chimney liner installation | $1,800 – $4,500 |
| Prefab chimney restoration | $600 – $1,800 |
What pushes price up in Beaverton is the same thing that makes these chimneys distinct: extensive water damage behind the brick, a flue that needs full relining rather than a resurface, or a prefab chimney with rusted sections that must be replaced. We quote every job upfront, so the price on the written estimate is the price you pay.
Neighborhoods We Serve in Beaverton
We work across Beaverton’s older suburban core and its newer edges, from the ranch neighborhoods off the main corridors through to the infill and townhome construction on the city’s west side. If your home was built before the 1990s and has a masonry or prefab chimney, it’s exactly the kind of property we see most. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, so there’s usually a nearby opening.
- Downtown Beaverton and the older ranch grid near 97005
- The split-level neighborhoods around 97006
- The post-war homes and two-story builds near 97007
- The newer infill and townhome areas around 97003
Service Area – Cities Near Beaverton
Beaverton is central to a stretch of the Portland metro that shares the same damp valley climate and many of the same mid-century homes, so the repair issues travel with the terrain. We also work in Bethany, OR, Cedar Mill, OR, Oak Hills, OR, and Lake Oswego, OR. If you’re just outside the Beaverton line, call and we’ll confirm coverage for your address.
Serving Beaverton, OR – Our Local Coverage Area
We serve Beaverton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Beaverton
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 413-9023 for a free estimate.
Many structural repairs, such as relining or significant crown work, may require a permit from the city. Requirements can vary by job, so it’s worth asking Beaverton’s building department before work begins. We’ll walk you through what your specific job needs.
Yes. We cover Beaverton’s older ranch and split-level neighborhoods as well as the newer infill and townhome construction around the city. Many newer homes have no chimney, but they still have dryer vents that need periodic cleaning. Call (866) 413-9023 to book.
Whether you need a sweep, a dryer vent cleaning, or a repair on a chimney that’s showing its age, one call covers all three. Call (866) 413-9023 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beaverton Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Roger Quinn"We got four quotes because the number involved was big enough to be worth the hassle. Two of them were clearly guessing. One was reasonable but couldn't start for a month. These guys were in the middle on price, could start the following week, and were the only ones who asked to see the actual problem area before quoting instead of estimating from my description. Work took a day longer than planned, which they told me about the morning it happened rather than after the fact. No change to the price."
- Paige Norris"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Dale Novak